On the media center back panel, insert the audio input cable 8-pin plug into the Main speaker jack
On the Acoustimass® module connection panel, insert the other end of the audio input cable (RJ45 plug) into the AUDIO INPUT jack
Insert the power cord into the Acoustimass module and into a power outlet. Turn on the power switch
From the power supply, insert the plug of the attached cable into the DC Power jack on the media center back panel
Insert the 2-prong plug into the power supply and the other end into a power outlet
connect all five speakers. on the acoustimass module connection panel, insert the color-coded rca plugs for all five speaker cables into the jacks labeled outputs to cube speakers. notice the letters on the cable end that identify the position of the speakers in the room, and route the cable accordingly. to find out more about speaker placement, see speaker placement and adaptiq® audio calibration system guidelines
The plug-in cable for your speakers fits only one way into the jack, which ensures proper polarity (+ to + and - to -) connections. To connect the plug-in speaker cable, orient the plug of each speaker cable with its small knob up and insert the plug fully into the jack on the rear of its respective speaker