Replacing the battery

To replace the battery, follow these steps:

Using the 2.5 mm hex wrench supplied with the replacement battery, remove the two screws at the bottom of the speaker

Push up on the back of the cover until it slides up and loosens

Pull the cover up and away from the speaker back

Using the 2.5 mm hex wrench, remove the two screws securing the battery (located near the bottom of the speaker)

Pull the battery straight out of the speaker

Insert the new battery

Note: Replace the SoundLink® speaker battery only with a genuine replacement battery from Bose or an authorized Bose dealer.

Replace the screws in the battery and tighten with the 2.5 mm hex wrench

Align the holes in the cover with the anchor posts on the back of the speaker, and press the cover into place

Slide the cover down on the anchor screws until it stops

Replace and tighten the screws on the bottom of the cover

To activate the new battery: Insert the power supply plug into the DC jack on the back of the speaker, then plug into an AC (mains) outlet for three hours

Hasznos volt?


Köszönjük, hogy elküldte hozzászólását.